LDK 20 - SMDR problem

[readypro]

Hi,
i have a LG LDK20 and i'm trying to configure SMDR.

My steps are:

1) I've enabled to send all details in PGM177 and configured PGM175 on TELNET1

2) Lanched TELNET xxx.xxx.xxx.xxx i receive an answer like

Welcome to LDK-20 system. Press enter.
Your address is 192.168.0.14. Your port number is 3.

3) When i receive a call for example on line 1 i also receive a string like

001 : 333111111

(where 333111111 is the incoming caller ID)

that's all. I didn't receive nothing else.
I was expecting to receive something like

---- Site Name :              ---------------------------------------------------------------
 NO   STA   CO  TIME     START          DIALED             ACT  CNT   COST      
 ACCOUNT CODE
---- ----- --- -------- -------------- ------------------- --- ----- ----------- ------------
0001 10    004 00:00:00 03/02/01 12:30 O123456789           **     0           0
0001 10    004 00:00:00 03/02/01 12:30 O987654321           **     0           0

as i've seen in this thread

http://www.tek-tips.com/viewthread.cfm?qid=1553034

but the only things i see is line number and caller ID for incoming calls.
What can i try/check?

Thanks for any help

 

[readypro]

Solved!

PGM142 CO line attribute : the flag "SMDR Print" was OFF