Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LAN and Wireless media state shows Media disconnected 1

Status
Not open for further replies.

granty39

Technical User
Joined
Jul 12, 2006
Messages
9
Location
CA
I recently had an issue with a BLUE screen error (see my previous thread STOP: 0x000007E). I eventually had to give in and reformat the HDD with the system CD and discs 1 and 2 of the Recovery CD.

Once I completed this I was unable to connect to any network - Wireless or LAN. When I do an ipconfig I can see:

Node type: Broadcast

Ethernet adapter Local Area Connection:
Media State......................: Media disconnected
Description .....................: Broadcom 440x 10/100 (etc)
Physical Address.................: this info is there

Ethernet adapter Wireless Network Connection:
Media State......................: Media disconnected
Description .....................: Intel PRO/wireless (etc)
Physical Address.................: this info is there

Can someone please tell me what I need to do. Have I deleted the file while refomatting or is it possible my BLUS creen error was down to a virus that has wiped out the config for these two devices?

Thanks in advance

granty39
 
Are both network adapters "connected" to the same device, a wireless router? This should be cold, powered-off, restarted if so.

Then cold, powered-off, restart the computer.

If no joy:

. Do other computers work okay?
. Test: Disable Media Sense
If XP Media Sense feels there is no connection, it unbinds all protocols to the adapter including TCP/IP. This is why no sort of ping tests can be done. Disable Media Sense, reboot the computer and test.
See:
 
How to troubleshoot wireless network connections in Windows XP

How to troubleshoot wireless network connections in Windows XP Service Pack 2

How to troubleshoot TCP/IP connectivity with Windows XP

How to troubleshoot network connectivity problems

Building A Wireless Home Network with Windows XP

Windows XP Wireless User Guide

WinXP Connectivity Issues
faq779-4625
 
I just did what was advised by bcastner and I now see IP addresses. I can now connect to the LAN and will now try to set up the wireless.

Thanks for your help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top