rossendryv
Vendor
Does anyone know if u can use blank label templates in Adobe PDF file in Freehand. The templates ae located at: Thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Label templates
- Thread starter rossendryv
- Start date
- Status
HelloKittyBF1942
Technical User
Download the templates in PDF form from the web site. Open the templates in Acrobat (not Acrobat Reader). Export the PDF as a .eps with preview - ASCII. I used Postscript language level 1. Save the file. Open Freehand and create a new document. Import the eps file that you exported from Acrobat. Change your settings from points to inches. Your eps file is now a linked image.
Your new image should be 8.5 x 11 same as your page size. Now Zero your image. X=0 Y=0, which drops it down to the lower left corner. It should fit exact.
By doing this we only made the lines availible in Freehand as a template. You can now use Freehand to layout your labels. If you have any problems or questions please let me know. This may not be the best way, but it works great for me!
HelloKittyBF1942
Your new image should be 8.5 x 11 same as your page size. Now Zero your image. X=0 Y=0, which drops it down to the lower left corner. It should fit exact.
By doing this we only made the lines availible in Freehand as a template. You can now use Freehand to layout your labels. If you have any problems or questions please let me know. This may not be the best way, but it works great for me!
HelloKittyBF1942
- Status