Label print

[sermac]

Hi: In my project I have an @say to print "1" label.
I insert the Avery sheet of lables and click print. I am using an HP LJet 5P printer, I click my btn to print and I "occasionally" get the following, first as a print out then 2nd the text of the label on the sheet in tray :

Printout 1:

@PJLSET Rosolution=600
@PJL Enter Language=PCL

Printout 2: lABEL TEXT. . .ends up on next sheet of paper in the tray.

Any inklings on what might be going on?

Feedback is appreciated.

THX

Bill

 

[ramani]

Hi

The paper size definitions may be wrong. Select the correct form .. set it as default.. and give a try to know if that is the problem.
ramani
(Subramanian.G),FoxAcc, ramani_g@yahoo.com