KSEXE command not going ... 2

[alradan1987]

Hello everyone,

I am trying to delete extension number 3933 by using
KSEXEIR=3933;
but it gives me
can not be executed
extension is busy

Whereas no telephone is connected to this extension, just wires connected to MDF


helpppppppppppp plzzzzzzzzzzzzzzz

 

[alradan1987]

why nobody help me .. i feel so down .. this is the second time I post a question and you nobody care about me

 

[himdp]

It is buy in software. What is the result of SUSIPIR=3933;

 

[alradan1987]

Thanks for reply @himdp ... here is what I got .. FYI, I tried unblocking, blocking already in vain .. hope it is going to be OK.

<KSEXEIR=3933;
KSEXEIR=3933;
SURE? (YES/NO)
<YES
NOT ACCEPTED
EXTENSION IS BUSY
<SUSIPIR=3933;
STATUS INFORMATION AT 15:14:41 25NOV15
DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO
3933 DTS IDLE #027C BLOCKED #01D4
ODN1:IDLE
ODN2:IDLE
ODN3:IDLE
END
<SUDIPIR=3933;
DIRECTORY INFORMATION AT 15:36:01 25NOV15
DIRECTORY NUMBER : 3933
TYPE OF DIRECTORY NUMBER : DTS
NAME : SAFETY OFFICER
ADDITIONAL NUMBER :

EXTENSION TERMINAL DATA
EQU TERMD ADN CALALT TIMER
2-0-60-03 0021 1 0

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
1 03010101 0002120400 011151000 000001 0 00000000010000 F 0 -

DIGITAL EXTENSION FUNCTION KEY DATA
KEY KTYPE FCN VALUE DIG
00 PGM
01 FCN MEW
02 FCN CAD
03 FCN TNS
04 SKI F1
05 SKI F2
06 SKI F3
07 SKI F4
08 SKI MENU
09 ODN 3933
10 ODN 3933
11 ODN 3933
13 FCN TNS
14 FCN TNS
15 FCN TNS
16 FCN TNS
17 FCN TNS
18 FCN NLOG
19 FCN TNS
20 FCN TNS
21 FCN TNS
22 FCN TNS
23 FCN TNS
24 FCN TNS
25 FCN TNS
26 FCN TNS
27 FCN TNS
28 FCN TNS
29 FCN TNS
30 FCN TNS
31 FCN TNS
32 FCN TNS
33 FCN TNS
34 FCN TNS
35 FCN TNS
36 FCN TNS
37 FCN TNS
38 FCN TNS
39 FCN TNS
40 FCN TNS

GROUP DATA

PARALLEL RINGING DATA

DIVERSION DATA

PAGING DATA

END

<

 

[himdp]

Hi alradan,
I must admit I was expecting the linestate to read "busy" so I am guessing now

Is 3933 multiple represented?
Have you tried unblocking with allfm=yes?

To find exactly where the command is failing, you can execute the commands below in the order given and no other commands in between.

STISR;
STSII:UNITR=ICM,LIMR=1,SIGNAM=COMIN;
STTSS:TRI=1,SIZE=1000;
STTSI:TRI=1;
KSEXEIR=3933;
y;
STTSE:TRI=1;
STRAP:TRI=1;

There is some useful (IMO) information at this link

http://1drv.ms/1NQoOAh

Look at the MD110 Software Workshop pdf.

Good luck

PS there might be the usual calls to restart KLxxx DE LIM or even exchange any of which might work but they also might not work and you will have disrupted the service of other users to no effect.

 

[alradan1987]

Hello Himdp,

Thanks alot bro .. it worked with Allfm, I am really so grateful ..

The OneDrive link is not working, can you fix it .

 

[himdp]

Hello alradan,

I am glad you got the problem fixed. I have always used allfm=y when deblocking since I started working with MD110 in 1987, the year of your birth perhaps, it is a good habit.

The Onedrive link in the previous post works OK for me so I don't know why it gives a problem for you. However I have a new link so give this a try.

https://onedrive.live.com/redir?resid=5FC098E631EDE075!114

All the best.
Himdp

 

[alradan1987]

hello again,

Thanks indeed, link is working fine now and yes my birth is in 1987. I have lots of resources on MD110, I will try to post & share them as soon as possible.

Kind regards
Abdulaziz Alradan

 

[whosrdaddy]

Abdulaziz,

please note that this forum is monitored by the supplier (Mitel) and that any infraction on copyright will be notified.

Cheers,
Daddy

-----------------------------------------------------
Helping people is my job...

 

[alradan1987]

Hello,

Thanks for your advice "Daddy".

Kind regards,

Aziz