ITG Line password connection ?

[crac74]

Hi,

I am configuring a Succession Media Card to install IP Phones for a call center. I've upgraded loadware to IPL 3.05.2, controler firmware to 6.7 and IP Phones firmware to 060xB59 (latest versions available on the Nortel website)
I can connect through telnet to the card and enter the IPL prompt with login/password = itgadmin/itgadmin
I've read that we can enter into debug by typing "vxWorksShell". But I've seen nowhere in documentation the login / password to go there.
I would like to delete 2 strange phone firmware files I can see with command "umsPolicyShow" (0604C00 i2002 Ph2 activated NEVER)

Are we authorized to enter debug like we can do with Meridian 1 ? If yes can you give me the login-password ?

Thanks a lot.

 

[one234]

Hi,

If I remember correct it's the same as the PDT password in the pbx. If you know it, you know it. If you don't, you don't. And you will not get it in the forum.


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...

 

[crac74]

OK I know the passwords for PDT in the pbx. but the SMC asks also for a login name. Not the pbx.
I'll try and see.
Thanks.

 

[janaya]

Most of the time when you have to get into this portion of the programming, if you call ETAS they will give you the password. That's how I got it.