Currently running CM5.2 with the following software release
Operating system: Linux 2.6.18-128.AV07PAE i686 athlon
Built: Aug 19 04:58 2009
Contains: 02.1.016.4
CM Reports as: R015x.02.1.016.4
CM Release String: S8730-015-02.1.016.4
UPDATES:
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.1.016.4-18475 activated cold patch 18475 for 02.1.016.4
Can I change the "Service Type" on an ISDN PRI from Public-network to Tie without busying out the trunk group? I have a gourp that is using my "Public-unknown" table to send out a number I want callers to see, but on this trunk group the Serivce type is "tie" and the feature works,,,but on my other trunk group the service type is public-network and it will not use the table....
Operating system: Linux 2.6.18-128.AV07PAE i686 athlon
Built: Aug 19 04:58 2009
Contains: 02.1.016.4
CM Reports as: R015x.02.1.016.4
CM Release String: S8730-015-02.1.016.4
UPDATES:
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.1.016.4-18475 activated cold patch 18475 for 02.1.016.4
Can I change the "Service Type" on an ISDN PRI from Public-network to Tie without busying out the trunk group? I have a gourp that is using my "Public-unknown" table to send out a number I want callers to see, but on this trunk group the Serivce type is "tie" and the feature works,,,but on my other trunk group the service type is public-network and it will not use the table....
