ISDN fax 1

[Scott99]

I'm setting up an ISDN fax by using a DAT module. If I attach an ISDN phone I can call the phone and make calls but if I hook it up to an ISDN fax machine I can not get it to work. I'm not sure if any settings need to be changed for such a device. Does someone know what may be wrong in these settings?

Data Extension: 8446 Name: ISDN fax
Type: wcbri COS: 1
Port: 01A1401 COR: 6 Multimedia? n
TN: 1


ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:



CIRCUIT SWITCHED DATA ATTRIBUTES
Default Duplex: full Default Mode: async Default Speed: 1200

DATA MODULE CAPABILITIES
Default ITC: unrestricted Default Data Application: M2_A

DATA MODULE


BRI LINK/MAINTENANCE PARAMETERS

XID? n Fixed TEI? n
Country Protocol: 1 Endpt Init? n

 

[Callmaster]

hi scott99, i had the same problem and i fixed it with following configuration:

I added a station as a wcbri type ...and set Data Module "y"

Extension: 3270 BCC: 0
Type: WCBRI TN: 1
Port: 01A0804 Coverage Path 1: COR: 6
Name: @ISDN Fax Coverage Path 2: COS: 1
Hunt-to Station:

STATION OPTIONS
Loss Group: 3
Data Module? y

BRI OPTIONS
XID? n Fixed TEI?n
1-Step Clearing? y
Country Protocol: etsi Endpt Init? n

And Site 4 is designed:

DATA MODULE

Data Extension: 3271 Name: @ISDN Fax
COS:1
COR:6
Multimedia? n
TN: 1
ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:



CIRCUIT SWITCHED DATA ATTRIBUTES
Default Duplex: full Default Mode: async Default Speed: 19200

DATA MODULE CAPABILITIES
Default ITC: unrestricted Default Data Application: M2_A




With best regards
Callmaster

 

[Scott99]

that worked great...thanks!!