ISDN Caller Display: ?? 1

[Phoneman2]

I found this in the hunt group form. It ask grp-name mbr-name, If I put one of them in where does it show up at? On the display phone or on the caller ID box? Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[nknook]

It would show up at the calling party, allthough I doubt it will show the name, but it will show the number (at least where I live).
From the manual:

This field is required if, on the System-Parameters Customer-Options screen, the
ISDN-PRI or ISDN-BRI Trunks field is y.
grp-name/mbr-name: Enter grp-name or mbr-name to specify whether the hunt group name or member name, respectively, will be sent to the originating user.

If the ISDN-PRI or the ISDN-BRI Trunks field is n, this field must be blank.

Most of the times this would be grp-name, or else customers will start calling huntgroup members directly.

Cheers,
Nico