ISDN 2E trunk card

[Switchman]

Hi all,

I am planning on connecting some ISDN 2E circuits up to an ISDN trunk card however I need to know what the pin outs are on the amphonal cable so that I can connect the trunk card up to an RJ45 patch panel. If you can help let me know, I could also do with a bit of help setting up the trunk group for the isdn 2E circuits, if you can help please reply

Cheers

Dave.

 

[monacom]

There will be 12 ports on your board.The anphenol will have to be puched down on the blue and green pairs of the patch panel.Start on the blue pair with the White/blue and alternate them between the blue and greens on the patch panel.

 

[europe]

The ISDN BRI trunk board TN2185 has only 8 ports.

Port Signal CrossConnect Pin Color Amp Pin
1 txt1 1 w-bl 26
txr1 2 bl-w 01
pxt1 3 w-o 27
pxr1 4 o-w 02
2 txt1 5 w-g 28
txr1 6 g-w 03
pxt1 7 w-br 29
pxr1 8 br-w 04

end so on, it is in the DEFINITY ECS Installation for Adjuncts and Peripherals manual
Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe