Is there a way to live monitor trunks for outages? 4

[surferdude949]

I can see traffic on the emulation using "monitor traffic trunk-groups" but this only shows me capacity data.

I found "Monitor Health". Is this live data?

 

[AvayaTier3]

status trunk-group
list measurements trunk-group


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[1a22ip]

Try this command monitor traffic trunk-groups. It will give a good snap shot of all trunks. One downside it is slow to update.

Just a thought
ED

1a2 to ip I seen it all

 

[PeteBull]

You can set up ASA to check for outages every x minutes and send you an email if there are outages. It's under Fault & Performance > Monitor Trunks.

 

[surferdude949]

You can set up ASA to check for outages every x minutes and send you an email if there are outages. It's under Fault & Performance > Monitor Trunks

Which form can I set this up? Thank you.

 

[surferdude949]

How come everytime when I do a "monitor health" and I cancel,my connection drops?

 

[1a22ip]

Must be a Bug It happens to me as well

ED

1a2 to ip I seen it all

 

[AvayaTier3]

Not a bug, monitor health drops your "tui" when cancelled.
This is working as designed.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[1a22ip]

OK I must ask why would you have to log out and log back in after this command. No other command does this.

ED

1a2 to ip I seen it all

 

[AvayaTier3]

You don't have to logout. The system will log you off.
Working as designed. I did not design it, but I do know how it works.

DEFINITY Enterprise Communication Server Release 9
Maintenance for R9si 555-233-123
Issue 2
November 2000
Maintenance Commands and Trouble-Clearing Aids
monitor health 8-207

After this command terminates, all users are logged off.

Output
The following example is a display of the monitor system health command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
If standby SPE Emergency Transfer Select Switches change and handshakes are
down, the displayed Emerg Trans field is incorrect until handshake reintializes.
When the monitor health command terminates, users are logged off of the system.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[PeteBull]

it's not a bug, it's a feature