Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
is there a way to change color on text being displayed 1
- Thread starter sonic86
- Start date
-
1
- #2
If you use the correct escape sequences for the terminal emulation you are using, then the answer is yes. It shouldn't be hard to find these for the ANSI BBS and VT emulations, but I'm not sure how well documented (on the Internet, I don't believe any information of this type is in the help files) it is for the other emulations in Procomm.
- Thread starter
- #3
Hello,
The Escape Sequences that Knob talked about are what we use in the Nortel World with the VT-100 Family of Terminal Interfaces. In Nortel we use a HEXTOSTR Command. ( Hexidecimal to String ) to ALTER Colors, Blinks, Etc ! The HEXTOSTR Command Tells the VT-100 how to behave.. Not much help here; but I'll contact some Friends and see what I can Find Out.
Example in Nortel SFDEV Scripts:
DOUBLE HEIGTH WORDS
PRINT ‘ HANK ‘ ( HEXTOSTR #1B #23 #33 )
PRINT ‘ HANK ‘ ( HEXTOSTR #1B #23 #34 )
THE WORD HANK WILL BE DISPLAYED IN DOUBLE HEIGTH LETTERS.
Just an Idea !
Hank
The Escape Sequences that Knob talked about are what we use in the Nortel World with the VT-100 Family of Terminal Interfaces. In Nortel we use a HEXTOSTR Command. ( Hexidecimal to String ) to ALTER Colors, Blinks, Etc ! The HEXTOSTR Command Tells the VT-100 how to behave.. Not much help here; but I'll contact some Friends and see what I can Find Out.
Example in Nortel SFDEV Scripts:
DOUBLE HEIGTH WORDS
PRINT ‘ HANK ‘ ( HEXTOSTR #1B #23 #33 )
PRINT ‘ HANK ‘ ( HEXTOSTR #1B #23 #34 )
THE WORD HANK WILL BE DISPLAYED IN DOUBLE HEIGTH LETTERS.
Just an Idea !
Hank
Here's a web site I found while searching on Google with the terms ANSI and escape sequence that looks like it may be of use:
To write a string to the terminal, just use the termmsg, termwrites, or termputs command, whichever is most appropriate to your need. Use ^[ to represent an escape character in your strings where necessary.
To write a string to the terminal, just use the termmsg, termwrites, or termputs command, whichever is most appropriate to your need. Use ^[ to represent an escape character in your strings where necessary.
- Thread starter
- #6
Oops! I reread the help file for the termmsg command and I didn't notice the first time that termmsg does not support caret (^) sequences, so you'll need to use either termwrites or termputs.
When I tried your string with the termwrites command, I was initially seeing the same output you were. I added an extra left bracket to the command and only TEST was output, but I didn't see any attributes being set on the text. I added an m to the end of the string and this resulted in TEST being displayed in red and flashing. Is that the result you were looking for? Here's the command as it looked when I finished it:
termwrites "^[[1;5;31m TEST"
When I tried your string with the termwrites command, I was initially seeing the same output you were. I added an extra left bracket to the command and only TEST was output, but I didn't see any attributes being set on the text. I added an m to the end of the string and this resulted in TEST being displayed in red and flashing. Is that the result you were looking for? Here's the command as it looked when I finished it:
termwrites "^[[1;5;31m TEST"
- Thread starter
- #10
- Status
Similar threads
