Is there a feature in an opt 61c rel 25.4 to dial a group of numbers 1

[nlhtech]

We have a request from a customer who would like to have one number for an emergency response, which when called would contact a list of pager numbers.

 

[PERRYPJ]

GROUP CALL (UP TO 10 NUMBERS)

OLD ROLMEN WORKING ON NORTELS

 

[nlhtech]

This feature would be perfect if outside numbers can be dialed. Do you know if Group Call can dial outside numbers.
It looks like the number is restricted to 4 digits.

 

[bigindian65]

You could trick it from there with acd NCFW or phantoms

 

[nlhtech]

Thank You!

 

[cmawbey]

This feature allows many, predefined, extensions to be called simultaneously at the press of a key on a digital set. As each extension answers they automatically enter the conference call. Analogue sets cannot initiate a Group Call however they can be included in the group.

For Meridian 1 maximum number of members in a group is 20.
Option 11C maximum number of members in a group is 6.

The maximum number of groups on a system is 64.

Feature Implementation

The members in the group (extensions) are defined in a list using Program 18. After the list has been defined the Class of Service, for each extension in the group must be set to Warning Tone Allowed (WTA) and the feature needs to be programmed to a key for any digital set that is to initiate the group call.

Example

This example shows how a Group Call List (22) has been set up to call four extensions (2206, 2401, 2405, 2406). It also shows how the feature has been assigned to key 4 on TN 7 13.

LD 18
Load Program 18.
REQ NEW
TYPE GRP Group Call feature
CUST 0
GRNO 22 Select the Group Number
GRPC YES YES indicates that the originator of the group call controls the call i.e. if the controller clears down, then everyone in the group is cleared down. If this field is set to NO and the originator of the group call clears down everybody will remain in conference until they clear down themselves.
STOR 0 2206 2206 is input into store 0
STOR 1 2401
STOR 2 2405
STOR 3 2406
STOR Carriage return back to the REQ prompt

Now change the Class of Service to WTA for each group member and allocate the feature to a key for each member that is to originate the group call.

LD 11
Load Program 11.
REQ CHG Change
TYPE 2616 Telephone type 2616,2008 etc
TN 7 13
ECHG YES Allow Easy Change Option
ITEM KEY 4 GRC 22 Assign Group Call to Key 4
KEY
ITEM CLS WTA Allow warning tone
ITEM Carriage return back to the REQ prompt

 

[johnpoole]

the only problem with group call, call does not hunt ofr forward and all ext have to answer.. it's been forever since i programed it due to that.. the call can be transfered

john poole
bellsouth business
columbia,sc

 

[bigindian65]

Thanks for the clean up JP.