IPSI upgrade scheduler...time is in the past ERROR

[tazman12]

s8700 CM 2.0 and I'm trying to upgrade the firmware on my IPSI's from 7 to 12. I can do the ones that are in STNDBY mode with no problem, but when I try to schedule my active ones for after hours, I get an error message "time is in the past".
I've triple checked the times on the servers, etc.

Thoughts?

Taz

 

[tazman12]

Nevermind...fixed. had avaya on the phone...he went to a "mentor" and came back and asked me to try again and it worked. I asked him what he did and he said "nothing". Working fine now.

Taz

 

[mrjedi]

i had a similar problem and my time was set to Europe/London and I changed it to GMT and it worked. What was your time zone set to?