Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPOffice to NEAX2000IPS by Analog Trunk Port ????

Status
Not open for further replies.
Piochu

Piochu

IS-IT--Management
May 14, 2006
4
PL
I hane to connect IPOffice to NEAX2000IPS (NEC) by router (voiceoverIP).

It is possible using router cisco with FXO interfaces (provide a gateway from the VoIP network to the analog PSTN, or to a PBX that does not support E&M signaling, so users can reach telephones and fax machines outside the VoIP network).

I think connect Analog Trunk Port to FXO (cisco), this idea will be correct?????

 
Status
Not open for further replies.

Similar threads

JM2009
  • Locked
  • Question
IPO500 call forward no answer in hunt group from a analog trunk line
Replies
6
Views
535
JM2009
JM2009
L
  • Locked
  • Question
analogue trunk problem ip office
Replies
4
Views
474
LuigiEspo
L
lulsperger
  • Locked
  • Question
IPOffice QoS with Grandstream WP810
Replies
2
Views
323
lulsperger
lulsperger
sheldoom
  • Locked
  • Question
H.323 Trunk to SIP Trunk
Replies
4
Views
641
Menniss
Menniss
DiscLight
  • Locked
  • Question
Analog Unsupervised Disconnect issue 4
Replies
8
Views
674
Nortel4Ever
Nortel4Ever

Part and Inventory Search

Sponsor

Back
Top