Ipoffice t1/e1 combine use

[wilsontec]

Hi everybody
Have any document can show about IPO 500 version 6.0 use T1 and E1 card config in same system also alaw mulaw and auto change. Because PSTN is using t1-pri but IVR is using E1-pri.

Is it work ?

Thanks everybody


Wilson Man

 

[trinetintl]

You are going to need two IPO's one configured USA for the T1 and one configured for any other place in the world for the E1, no other way around it that I know off.

RE

http://www.trinet-intl.com

APSS - SME
ACIS - SME

 

[wilsontec]

thanks trinetintl

 

[tlpeter]

Or get SIP trunks for one or both devices (can the IVR do SIP trunks)


BAZINGA!

I'm not insane, my mother had me tested!