Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPOffice 8.0(16) Upgrade

Status
Not open for further replies.
PThorne

PThorne

Technical User
Dec 5, 2011
5
US
When we go to upgrade all the boxes are checked but it immediately fails out when you click on the upgrade button. Any ideas? It says the required license is 5(R8.0) and that's what we have.
 
Sort by date Sort by votes
You are using the wrong password I'd say, it's "password" by default and is NOT the same as you use for Manager to configure the system :)

 
Upvote 0 Downvote
Try upgrading just the processor first. If that works, you should be able to power cycle the system and have the connected modules upgrade automatically.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lulsperger
  • Locked
  • Question
IPOffice QoS with Grandstream WP810
Replies
2
Views
338
lulsperger
lulsperger
wilsontec
  • Locked
  • Question
Avaya Ipoffice J139 1G Lan not reach
Replies
1
Views
333
Mo. Abdullah
Mo. Abdullah
jrothwell
  • Locked
  • Question
Lucent 7406 Plus / IPOffice 2
Replies
6
Views
540
jrothwell
jrothwell
M
  • Locked
  • Question
can Cause Code = 16 in ip office
Replies
3
Views
580
IamaSherpa
IamaSherpa
D
  • Locked
  • Question
Lost Recordings on IP Office after Upgrade 2
Replies
2
Views
670
IPOriface
IPOriface

Part and Inventory Search

Sponsor

Back
Top