IPO with two BRI & 6 MSN: MSN ringing / no ringing on diffrent Phones

[LJDirk]

Hello around,

Environment:
- IPO V2 with EVM
- two Basic Rate ISDN with 6 Numbers like 11, 22, 33 one BRI1 and 44, 55, 66 on BRI2
- 3 or more digital Phones with extension 900, 901, 902

What i want and customer need is:

- Ext 900 must be

- ringing on incomming call to MSN 11 and MSN 33​

- only LED blinking on incomming call to MSN 44 and MSN 66​

- press button to dial out on BRI1 with CLIP 11 (without dialing a "0")​

- press button to dial out on BRI1 with CLIP 22 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 44 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 66 (without dialing a "0")​

- Ext 901 must be

- ringing on incomming call to 44 and 66​

- only LED blinking on incomming call to 11 and 33​

- press button to dial out on BRI1 with CLIP 11 (without dialing a "0")​

- press button to dial out on BRI1 with CLIP 22 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 44 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 66 (without dialing a "0")​

- Ext 902 must be

- ringing on incomming call to 11 and 44​

- only LED blinking on incomming call to 22 and 66​

- press button to dial out on BRI1 with CLIP 11 (without dialing a "0")​

- press button to dial out on BRI1 with CLIP 22 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 44 (without dialing a "0")​

- press button to dial out on BRI2 with CLIP 66 (without dialing a "0")​

Played with Dummy Numbers and for this Dummy on Ext 90x with the Keys "Bridged Appearance" but no look, because the Dummy is not aktiv...
Also played with Line Appearance - no choice....
At the moment no more ideas i have....
It´s not important, how many Buttons use this scenarion, but it´s more simple, it´s more better...

Obviously it is of eminent relevance, that I this, what you celeprate, not optimally effective assume, since the integrate of you in the communicative system as code related terms with me no explosive associations in mental-empirical reproduction process of the mind.

 

[derfloh]

I would route incoming calls to groups. Ringing extensions for that particular MSN have to be member of the group. Extensions that should only get visual call indication will not be a member of the group but only have a group BLF button to see that there are calls waiting and the can pick up that call by pressing the button.

Outbound create a short code N/Dial/NSi...11 or whatever to send for any individual user. Also create system or user short codes like #22N/Dial/NSi...22 and #33N/Dial/NSi...33 and so on. Users can now decide what number to send by prefixing the dialled number with either #11 or #22 or #33 ...


To make it easier for the users you can create buttons with short dial function containing #11, #22, ... As phone number with a description like "send 22", "send 33" and so on.