I have an opportunity to install a 5 site SCN using PPP T1.
The catch is the existing 5 year old network equipment is not up to the task so I will need to plug my t1 into a DSU and use the WAN port on the 406V2 to route all voice and data. The main site has a Cisco handling the 5 t1's there.
The internet is at the main site so will this be as easy as making my IPO at the remote site act as the gateway and building an ip route of 0.0.0.0 to point to the wan interface?
I am up against a Nortel BCM which I know will accept the t1 connection directly and is capable of acting as their router.
------------------------------------------
Wash, rinse, repeat.
The catch is the existing 5 year old network equipment is not up to the task so I will need to plug my t1 into a DSU and use the WAN port on the 406V2 to route all voice and data. The main site has a Cisco handling the 5 t1's there.
The internet is at the main site so will this be as easy as making my IPO at the remote site act as the gateway and building an ip route of 0.0.0.0 to point to the wan interface?
I am up against a Nortel BCM which I know will accept the t1 connection directly and is capable of acting as their router.
------------------------------------------
Wash, rinse, repeat.