optionsleft
Vendor
Does IPO supports remote access feature like the Definity wherein we can create remote access extension and barrier codes? The feature is commonly known as direct inward system access (DISA).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPO Remote Access feature 2
- Thread starter optionsleft
- Start date
- Status
-
2
- #2
ProviderReborn
Technical User
Not with the actual IP Office. BUT if you have VM Pro it is achievable.
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement (Aug 30th)
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement (Aug 30th)
- Thread starter
- #3
ProviderReborn
Technical User
The one I have looked at is very simple. I think it should have a password check on it at least however.
Its basically a DDI pointing to a VM module.
Then in your VM do a security check. IE Check digits option.
Then from sucess pass to a menu with a $ option.
The from the $ option point to a transfer and in that transfer use a $Key in the specific tab.
This will also look at your call barring and stuff in your shortcodes/ars.
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement (Aug 30th)
Its basically a DDI pointing to a VM module.
Then in your VM do a security check. IE Check digits option.
Then from sucess pass to a menu with a $ option.
The from the $ option point to a transfer and in that transfer use a $Key in the specific tab.
This will also look at your call barring and stuff in your shortcodes/ars.
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement (Aug 30th)
- Status
Similar threads