ipo 9.1.100 rebooting after a send config

[DigitalG]

ipo 9.1.100 rebooting after changing a user or any feature in manager, when I saved it, the pone system reboots! ( not every time)

 

[Phone9uy]

Are you selecting the Immediate reboot option?

 

[DigitalG]

No merge of course!

 

[Phone9uy]

I had to ask Sounds like the config might be corrupted then. Try loading an older version if you have one and/or recreate the SD card. You might also try upgrading to the latest SP.

 

[snowman50]

Does your system use just ip phones.
Does the system actually reboot or is it just the ip phones rebooting.

The reason I am asking is I had 8.73 system reboot the ip phones but the actuall base unit ccu and lines were ok.
The same as you do a simple merge and the phones went down.

I still don't have the answer.

 

[DigitalG]

Yes only ip phones.

 

[Westi]

does the config close when you saved it? if not then the reason is an open config that doesn't have the IP extensions in it and they need to re-create after every sending of the config

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[DigitalG]

I can make 20 sucessfull save in a row. And for no reason,it reboots

 

[tlpeter]

What does monitor shows?

BAZINGA!

I'm not insane, my mother had me tested!

 

[DigitalG]

I dont know.im going back today to get trace.

 

[tomlux]

Hy,
we also had a such problem on out 9.1.100 version.
Could you start the "System Status" application and look under "System-Alarms"?
Here you will find the reason for your last system restart.

In our problem, after saving the configuration we had here a "Segmentation violation" as reason for our last reboot :-(

Tom