Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 8.1 PRI shows PRI 30 in Canada

Status
Not open for further replies.

gberger

Technical User
Mar 2, 2004
1,328
CA

I can't find a way to have my PRI to show PRI24 under Lines instead of PRI30.
Codec was showing A-Law in Telephony, i changed it to U-Law so maybe that's why the PRI is showing 30.
I changed Locale from UK to Canada with no effect.
Can i delete the PRI line, then reboot maybe it will then show PRI24?

Thanks,
 
Maybe you have a wrong SD card? There is a Alaw and a Ulaw version. If it is a Alaw version you cannot have a PRI24 setup.

A simple mind delivers great solutions
 
You will definitely need to erase the current pri line from the system

The IPO should have identified the correct locale on initial boot if you had defaulted and rebooted it correctly (it should detect your pc locale through manager when it boots)

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
I never does for me as it is always on UK for me.

BAZINGA!

I'm not insane, my mother had me tested!

 

The SD Card is MU-Law so i recreated it using MU-LAW again and created a new config file including my 2 DS30A expansion modules.
Now it shows the correct PRI24 but does not see the 2 expansion modules anymore.
I'm pushing back the files to the IPO using upgrade wizard to see if the 2 expansion will come up.
Really don't know why the system tought it was A-LAW at first, allready lost 6 hours trying to fix this thing...!

Any ideas for my modules?
 
In Manager, go to Lines and right click on your PRI. Click "Change Universal PRI Card Line Type." Select PRI24.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top