Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ipconfig command

Status
Not open for further replies.

mexjim

Technical User
Jan 22, 2003
4
MX
I can't seem to access If I do a ipconfig /flushdns followed by ipconfig /displaydns I see two entries related to and that's about all that's left after the flush. Why is this the only real entry left in dns cache after the flush. I suspect the entry is wrong because if I ping the ip address shown in cache it times out and maybe it's the reason I can't access the site. I'm really no expert in this area. Any ideas?
 
I can access that site and the ip is 80.69.70.75. Why don't put this ip to your browser and test. If the page will show then it's a dns problem.
 
I had tried that(80.69.70.75) and it works. I'm still curious about why only this one entry is left after doing the ipconfig /flushdns command. The ip address of the entry for shows as 213.206.72.222. I have since put an entry in the host file for 80.69.70.75 and that works too. I think the real fix needs to be done by the isp but I'm not sure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top