Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ipconfig command

Status
Not open for further replies.

mexjim

Technical User
Joined
Jan 22, 2003
Messages
4
Location
MX
I can't seem to access If I do a ipconfig /flushdns followed by ipconfig /displaydns I see two entries related to and that's about all that's left after the flush. Why is this the only real entry left in dns cache after the flush. I suspect the entry is wrong because if I ping the ip address shown in cache it times out and maybe it's the reason I can't access the site. I'm really no expert in this area. Any ideas?
 
I can access that site and the ip is 80.69.70.75. Why don't put this ip to your browser and test. If the page will show then it's a dns problem.
 
I had tried that(80.69.70.75) and it works. I'm still curious about why only this one entry is left after doing the ipconfig /flushdns command. The ip address of the entry for shows as 213.206.72.222. I have since put an entry in the host file for 80.69.70.75 and that works too. I think the real fix needs to be done by the isp but I'm not sure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top