IP Trunk 3.0 for Option 11C

[Gigaic]

I am configuring IP Trunks on an Option 11C which will connect to two remote BCM50s (2 BCM50s are already talking to each other). The IP Card (MC-32) is connected to an NTBK50 card through a DCHIP PC card. I have configured the ISL D-Channel, configured the route and having problems with configuring the trunks. This is the error I get:

>ld 14
TRK000
MEM AVAIL: (U/P): 2664557 USED U P: 259993 122873 TOT: 3047423
DISK RECS AVAIL: 383
ITG ISDN TRUNKS AVAIL: 16 USED: 0 TOT: 16
IP PEER H.323 TRUNKS AVAIL: 0 USED: 0 TOT: 0
AST AVAIL: 9 USED: 42 TOT: 51
RAN CON AVAIL: 16 USED: 0 TOT: 16
MUS CON AVAIL: 30 USED: 0 TOT: 30
TNS AVAIL: 2304 USED: 196 TOT: 2500
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500
SIP ACCESS PORTS AVAIL: 0 USED: 0 TOT: 0
TRADITIONAL TRUNKS AVAIL: 2463 USED: 37 TOT: 2500
REQ new 16
TYPE tie
TN 5 0
DES IP
XTRK itg1

SCH5787
XTRK

Route and ISL D-Channel below:
*****************************************
REQ: prt
TYPE: rdb
CUST 0
ROUT 1

TYPE RDB
CUST 00
DMOD
ROUT 1
DES IP TRUNK
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN YES
MODE ISLD
DCH 11
IFC SL1
PNI 00000
NCNA YES
NCRD NO
FALT NO
CTYP UKWN
INAC NO
ISAR NO
DAPC NO
PTYP ATT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1999
TCPP NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
STYP SDAT
MFC NO
ICIS YES
OGIS YES
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GTO 896
GTI 896
SFB 3
NBS 2048


PAGE 002

NBL 4096
TFD 0
EESD 1024
SST 5 0
DTD NO
SCDT NO
2 DT NO
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
NATL YES
SSL
CFWR NO
IDOP NO
MUS YES
MRT 21
PANS YES
RACD NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
OHTD NO
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 1999 1
ATRR NO
TRRL NO
SGRP 0
ARDN NO
AACR NO

REQ: ****
>
OVL000
>ld 22
PT2000

REQ prt
TYPE adan dch 11

ADAN DCH 11
CTYP DCHI
CARD 02
PORT 1
DES DCHIP
USR ISLD
ISLM 32
OTBF 32
CLOK EXT
NASA NO
IFC SL1
SIDE USR
CNEG 1
RLS ID **
RCAP ND2
MBGA NO
OVLR NO
OVLS NO
T23 20
T200 3
T203 10
N200 3
N201 260
K 7

I need help to identify what I am doing wrong.

Thanks
George

 

[RS528]

Do not use the TYPT TIE but TYPE IPTI

 

[Gigaic]

I did use type ipti, but when it gets to xtrk and i enter itg1, it also comes up with the following errors:

SCH1486 and SCH0125

Please help.
George

 

[Gigaic]

I guess I am using card TN rather than virtual TN and hence my problem.

Please advice.
George

 

[RS528]

XTRK must be MC32 and not ITG1

 

[Gigaic]

This is what i have configures as an IP Trunk with MC32 card in slot 5 of Option 11C.
****************************************************
DES IP
TN 005 0 00 00
TYPE IPTI
CDEN 8D
CUST 0
XTRK MC32
LDOP BOP
TIMP 600
BIMP 600
AUTO_BIMP NO
TRK ANLG
NCOS 7
RTMB 1 1
CHID 1
TGAR 1
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS CTD DIP WTA LPR APN THFD XREP
P10 NTC
TKID
FCAR NO
AACR NO
DATE 12 MAR 2007
******************************************************

Is it correct?

Thanks
George