IP Softphone to IP Softphone 2

[NX01]

R5.1 calls cannot connect. I can call my cell, my home and my main number, but cannot call another IP Softphone. Both just sit with no sound or voice. Did I miss anything when setting up the h.323 stations? Both are Road Warrior configs. They work great for VoIP to TDM but not VoIP to VoIP. Could it be a port issue? Do I need a H.323 turnk/signal group? I am on R11. I am stumped.

In the future everything will work...

 

[NX01]

So what I have so far is this:

IP-NETWORK-REGION 1:
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: no

Inter Network Region Connection Management

Region (Group Of 32)
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
001-032 1 2

IP-NETWORK-REGION 2:
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no


Inter Network Region Connection Management

Region (Group Of 32)
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
001-032 2 1

IP-NETWORK-MAP

IP ADDRESS MAPPING
Subnet
From IP Address (To IP Address or Mask) Region VLAN
170.20 .118.1 170.20 .118.254 1 n
172.17 .160.1 172.17 .160.254 2 n

Hows this look? What I am trying to accomplish is Direct IP to IP shuffling when logged into the LAN with a 170.20.118.X ip. When logged in with a 172.17 .160.X ip I want it not to shuffle. Did I do good?

In the future everything will work...

 

[mrjedi]

everything else should be set to " Y " except for remote ip softphones, where the "intra region" should be set to know. What happens when you tried this option. I am not sure whether you need to turn off the shuffling in the station form as well - page 2. Try these options and let us know.

 

[NX01]

I connected but got a ISDN denial error. So I removed the 172...ip range from the network map.

In the future everything will work...

 

[NX01]

I actually just moved the ip range to net region 1. I moved it back and removed g711mu from the codec set. That seemed to have helped with the calls but I am still getting far end echo from the pstn. I upgraded all the firmware for the clan and medpro. Do you think the echo will stop if I upgrade the DS1 firmware?

In the future everything will work...

 

[BuckWeet]

Sounds to me like you have a routing issue, or client based firewalls or something...


BuckWeet

 

[NX01]

The ip phones dont hear the echo...only the digital phones and outside the company.

In the future everything will work...

 

[mrjedi]

That happens during transcoding. Are you running G711 on all codecs. Make sure you have echo canncellation on the DS1 cards. That help us...

 

[NX01]

I will check....but we run the above.

In the future everything will work...