Ip Office to S8300 1

[Wattcom]

Any One set An Ip trunk From an ip office to a Avaya s8300 and no what the setting are on both systems

had it working oneway s8300 to the ipoff but could not get it going the other way

 

[bwilch]

There is a document somewhere out on the Avaya site that talks about IP trunking an IP600 with a Definity system. This basically gives you all the setup notes you need in order to do it. I used the document to create the IP trunk between my switch and IP Office, however have lost the document since then I took a quick glance through Avaya's site and didn't see it, but I know it is there and is a great reference when looking to do this.

 

[MikeD1971]

I am having the same issue here. What load of Ip Office are you using? We are using ip office 3.X our S8300 is 2.0.1, we also had a problem with a prologix running ver 11.

 

[Wattcom]

ip office 2.1 27 s8300 2.0.1

 

[MrIPO]

The document was Job Aid 43 Connecting an IP600 and IP Office via H323 IP Trunk.

They really need to update this to include newer models.

Umm anotherprivatebuild !!!

 

[crashtest1000]

This doc heading is under application notes on the V3 Engineers tool kit.

Get this CD its very good

Avaya Solution & Interoperability Test Lab
Configuring an Avaya S8300 Media Server, Avaya G700
Media Gateway, and an Avaya IP Office 403 For Call
Display Information via an H.323 Trunk- Issue 1.0