IP Office CPU race than crashs

[nmessick]

So my IP Office starts acting up, calls can't connect, things just start stalling. If I connect monitor stuff is racing across my screen so fast I can hardly watch any of it. Goes for a few minutes and the system crashes. There are loads of the messages below. After the reboot it stops. The line numbers are other systems on my SCN. I'm at 9.0 SP3. Any idea whats happenng?


16:03:01 199500375mS CMLineRx: v=20
CMFacility
Line: type=IPLine 20 Call: lid=0 id=1908800 in=0
IE CMIEPrimitiveData (7)
16:03:01 199500376mS CMLineTx: v=19
CMFacility
Line: type=IPLine 19 Call: lid=19 id=436 in=1
IE CMIEPrimitiveData (7)
16:03:01 199500378mS CMLineTx: v=20
CMFacility
Line: type=IPLine 20 Call: lid=0 id=1908800 in=0
IE CMIEPrimitiveData (7)
16:03:01 199500379mS CMLineTx: v=19
CMFacility
Line: type=IPLine 19 Call: lid=19 id=436 in=1
IE CMIEPrimitiveData (7)
16:03:01 199500380mS CMLineTx: v=20
CMFacility
Line: type=IPLine 20 Call: lid=0 id=1908800 in=0
IE CMIEPrimitiveData (7)
16:03:01 199500381mS CMLineTx: v=19
CMFacility
Line: type=IPLine 19 Call: lid=19 id=436 in=1
IE CMIEPrimitiveData (7)
16:03:01 199500383mS CMLineTx: v=20
CMFacility
Line: type=IPLine 20 Call: lid=0 id=1908800 in=0
IE CMIEPrimitiveData (7)
16:03:01 199500384mS CMLineTx: v=19
CMFacility
Line: type=IPLine 19 Call: lid=19 id=436 in=1
IE CMIEPrimitiveData (7)

 

[holdmusic34]

Use filters print and error only.

I'm clear but my fighter is down.