IP office 500 V2 Atm4 with Ob Hai Google Voice Analog Adapter Random Incoming Calls Ringing

[Xfmpcx]

I am trying to add additional analog lines to my test system at home. I have an Obi Hai Google Voice adapter which allows a normal analog POTS phone to work. If I connect the OBi Hai google voice adapter phone cord to the phone system the line will work. However, every few minutes I will get an incoming call the rings maybe twice and then goes silent.

I have looked in the monitor and the incoming call shows up but I cannot determine what is making the line ring. I have seen a similar problem before with a verizon POTS line. I cannot remember what I did to fix it though. I am not sure what trunk settings I would need to change. Any ideas?

If I can get the obi hai to work, I can add analog lines to any phone system in a pinch as long as the internet works.

 

[intrigrant]

Sounds like a message waiting notification issue.
If internet is working why not a SIP account instead?

 

[Xfmpcx]

Can you expand on the message waiting waiting notification? The obi hai does relay new voicemail messages to POTS phones.

If that is the case, what could I do on the avaya end to prevent those notifications from ringing in.

Also, I can do a sip account but google voice quality is pretty good and reliable. GV also uses XMPP and not sip.

 

[TouchToneTommy]

The FSK message waiting signal is interpreted as an incoming call. Get them to remove the voicemail feature and turn off the MW notification.