IP-DECT how to set up DHCP `?

[Albus]

Hello

I have to install a new system with a bunch of RFP's. Now I like the idea of using DHCP to deploy all RFP's. The ADMM would get a reservation, and all RFP's get there values without troubles. Well...

I have a Windows 2003 Server for VM Pro and for VoIP related services like DHCP for VoIP VLAN, TFTP ect.

This means, I'm not going to use IP Office for DHCP or Manager for TFTP.

My problem is, that I can't get this to work. But this is simply due to the fact, that there is no documentation that would really help in setting up DHCP for IP DECT.

Is there anyone who has done this before?
What I'm looking for is a list of options that must be given in the native data VLAN as well as the VoIP VLAN. I think I have worked this out, but I'm not sure.
Are all the Options in the format of 'string'? The documentation is very unclear in this point.

My RFP's get an IP-address, but they do not load the iprfp.bin.

Thanks
albus

 

[kwing112000]

What i usually do for IP phones is set up an option 176 string in the native VLAN. I am not sure if this applies to DECT or not but it would be like

L2Q=1,L2QVLAN=(VLan#)

THen put the full string in the Voice VLAN option 176 info
MCIPADD=xxx.xxx.xxx.xxx,MCPORT=1719,TFTPSRVR=yyy.yyy.yyy.yyy,TFTPDIR=z

where X would be the Ip of IPO and y is the TFTP server.

 

[IPOfficeIreland]

don't know if you can set dhcp for Dect. In the admin you have to assign the ip address for the ADMM, which unless you can bind the mac address in the dhcp to the same ip, will cause a problem.

 

[tlpeter]

Sure you can dhcp

In default the base station are on dhcp and if they do not get an ipadres they try again later


ACA - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[intrigrant]

The IP DECT can use DHCP server options but NOT 176!!,read this:

http://www.ipofficeinfo.com/pdf/Global_IP_Office_Technical_Bulletin_85.pdf

NIHIL NOVI SUB SOLE