IOS load problem....

[DManigo]

After upgrading the IOS on a C827-4v, this is what I get:

System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C827-4v platform with 24576 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x68f6a4
Self decompressing the image : #################################################
######################################################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-V6Y6-M), Version 12.3(16), RELEASE SOFTWARE (fc4)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 24-Aug-05 01:34 by ssearch
Image text-base: 0x80013148, data-base: 0x80BECB94

Then this-->>>>
0ºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­
ݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭ
ݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭݺݭ
ݺݭݺݭݺݭݺݭÝH/|?C¦|ˆ¦|‘C¦<€ÿð`„6¼|ˆ¦N€ |?C¦|ˆ¦|‘C¦8€|ŸÃ¦<€ÿð`„:X|ˆ¦N€
|?C¦|ˆ¦|‘C¦8€|ŸÃ¦<€ÿð`„:X|ˆ¦N€ |?C¦|ˆ¦|‘C¦<€ÿð`„7ð|ˆ¦N€ |?C¦|ˆ¦|‘C¦8€|ŸÃ¦
<€ÿð`„:X|ˆ¦N€ |?C¦|ˆ¦|‘C¦8€|ŸÃ¦<€ÿð`„:X|ˆ¦N€ |?C¦|ˆ¦|‘C¦8|ŸÃ¦<€ÿð`„:X|ˆ¦N€
|?C¦|ˆ¦|‘C¦<€ÿð`„9$|ˆ¦N€ ºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­Ýº
|?C¦|ˆ¦|‘C¦<€ÿð`„9$|ˆ¦N€ ºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­ÝºÝ­Ýº
============================================================
Is there any way to remove the IOS or pause the boot process to remove? The characters are running non-stop.

 

[NettableWalker]

I reckon your IOS is corrupted.

Do a CTRL break on boot, change the confreg to 0x101 (check this, i am not sure) and boot to rommon> and do a TFTPDNLD of a new IOS image from a TFTP server.

Google it and find decent instructions as it is not that intuitive.

 

[eurobadger]

Hi

Details are in

http://www.cisco.com/en/US/partner/...figuration_guide_chapter09186a0080118d19.html

EB

&quot;The most powerful command you will ever use is rtfm&quot;
EB