Intrusion what is it used for?

[firefoxfire]

I was programming on MICS 7.0 and I noticed a feature under CAPABILITIES called INTRUSION. I can not find any documentation for this feature.

Dose anyone know what this this is used for?

 

[Sam173]

it allows you to break into calls on other telephones. I know on the old Nitsuko staff could talk to you while you were on the phone but the caller could not hear. Must be used when a supervisor is listening in as training

 

[allworxguy]

Don't have that heading on this side of the pond.

Marv

http://www.telemarv.ca

 

[curlycord]

He means Priority Call is my guess.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[Sam173]

Your right Curlycord on the Priority Call, looked back at the manual and found this.

you will find it on page 347 of your Modular ICS 7.0
Installer Guide

Setting
Intrusion Protect IvI

Description
Determine the level of access this
telephone will have to allow the user to
break into calls on other telephones in
the system (Meridian 1 MCDN Break-in
feature).
To be able to use Break-in, the Protect lvl
for this telephone must be less than that
of the attendant telephone on the
Meridian.

Options
None, Low,
Medium, High

 

[allworxguy]

It's named differently over there is all I meant to say.

Marv

http://www.telemarv.ca