Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
International in CS1000
- Thread starter yous414
- Start date
Not very experienced with speed dial lists but I think you would be forced to null out that particular speed dial entry and add it back in? Another option is perhaps assign it to an autodial key on your phone - that way you press that autodial first and then access your speed dial list.
Worst case scenario is that you may have to rebuild your whole speed dial list - BOOOOO
Worst case scenario is that you may have to rebuild your whole speed dial list - BOOOOO
Is the access code provided by your telco carrier, or does the PBX provide the access code?
If the PBX provides the access code, then you can use a system speed call list, and assign an NCOS to the list that will allow it to make the call without needing the access code.
If the PBX provides the access code, then you can use a system speed call list, and assign an NCOS to the list that will allow it to make the call without needing the access code.
- Status
Similar threads
- Question
