Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
internal call log
- Thread starter jatsmitty
- Start date
mikeydidit
IS-IT--Management
To do this, you will need some sort of call accounting software interacting with their system. If you do a search in here about call accounting software several people here have made attempts of doing this within purchasing anything.
"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953
For the best response to a question, read faq690-6594
"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953
For the best response to a question, read faq690-6594
AvayaTier3
Technical User
change "intra-switch-cdr" and put stations you want to track on the form. If you are only wanting to track this and nothing else, you won't need call accounting software.
If you have call-accounting software, you need only to turn on station to station tracking on this form.
"change system-parameters cdr"
depending on your hardware platform, you can use data-modules for output device to connect a printer or PC with call accounting software. Or, you can use an IP endpoint if your switch platform supports that. If so, then you would
use "change node-names" and "change ip-services" to associate a node-name with an ip address, then associate the node-name to CDR1 / CDR2 for the clan(s)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
If you have call-accounting software, you need only to turn on station to station tracking on this form.
"change system-parameters cdr"
depending on your hardware platform, you can use data-modules for output device to connect a printer or PC with call accounting software. Or, you can use an IP endpoint if your switch platform supports that. If so, then you would
use "change node-names" and "change ip-services" to associate a node-name with an ip address, then associate the node-name to CDR1 / CDR2 for the clan(s)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
- Thread starter
- #4
AvayaTier3
Technical User
change system cdr
see if you have cdr records being output to a printer or some collection device. If not, program and install a printer or a collection device that will allow you to collect and analyze the collected data.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
see if you have cdr records being output to a printer or some collection device. If not, program and install a printer or a collection device that will allow you to collect and analyze the collected data.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
- Thread starter
- #6
AvayaTier3
Technical User
This can be as simple as using a printer with rs232 cable to the back of the A carrier.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
- Status
Similar threads
- Locked
- Question