Internal and Speed Dial Calls 1

[aklshaker]

I am trying to program certain extensions so that the only two calls they can make are internal calls and speed dial calls.

Can anyone help me with this?

Thanks!

 

[mcopini]

Just give them a COR 1 (or another COR that will only allow internal calls) If you do a change abbreviated-dialing enhanced 'x' and set 'privileged'to 'yes' all stations will be able to call numbers from the list regardless their COR.

Hop this helps and good luck!
Kind Regards,
Maarten Copini

http://www.effecta.nl

-Please let fellow members know if their post was of any help-

 

[Phoneman2]

I was going to say add the speed dial numbers to the ars ana tables and route them to a new route pattern and lower the cor on the extension to block it from the other trunks. Your way sounds better. Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[aklshaker]

Thank you!! Your post was very helpful, I guess I just don't understand the logic.. if a list is privileged, I would think it would mean that not just anyone could dial it, instead of everyone being able to dial it!

Does the field "Restricted Call List" underneath the COR effect this feature at all? I have it set to yes currently.

Thanks

 

[mcopini]

Please leave it at yes, this field works with the (un)restricted-call-list. command:list toll all and look up the numbers to be dialed. Don't change anything in here if you don't really know what you're doing!!

Good luck!
Kind Regards,
Maarten Copini

http://www.effecta.nl

-Please let fellow members know if their post was of any help-