Guest_imported
New member
- Jan 1, 1970
- 0
Do I need to reboot the server after installing SP3 (ARCserve 2000 on WinNT 4.0)?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing SP3 of ARCserve 2000 on WinNT 4.0
- Thread starter Guest_imported
- Start date
- Status
Well - I can't remember if it tells you that you need to or not, BUT it actually restarted my server for me (without asking) on one of the SP3 installs I did. I was not amused by this at all. You may want to do it after hours just to be safe.
It was an NT 4.0 server running the client agent and the BAOF. It was not the Arcserve host server.
It was an NT 4.0 server running the client agent and the BAOF. It was not the Arcserve host server.
crodrigues
Technical User
No need on Windows 2000. I have just installed SP3 and it did not ask for a reboot. If it requires, this is another question... 
- Status
Similar threads
- Locked
- Question