All changes have to be entered via the prompt command which was OK for my network manager, but he has moved out of state to another job and my comfort level and knowledge for the firewall is not great. I have been told that PDM is a better way to control the firewall. I have checked DES & 3DES activation keys and they are active and the firewall is version 6.1. My question is: If I load PDM, will I have to reload the configuration? Will I be able to access the firewall via my desktop using my internal IP address and is it possible to create a script for reloading the configuration.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing PDM For Cisco 501 PIX Firewall
- Thread starter all4it
- Start date
PDM is already loaded into your PIX. You don't have to reload it. All you need to know is the IP of your PIX (default:192.168.1.1), and the password(default: no password, blank). Open your Internet Explorer, and type, That is it. Remember, http"s". You also need to have Java enable for your brower.
HI.
You can find more info here:
Bye
Yizhar Hurwitz
You can find more info here:
Bye
Yizhar Hurwitz
- Status
Similar threads
- Locked
- Question
- Locked
- Question