Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing an IEEE 1394 PCI Board?
- Thread starter ibne0
- Start date
Best just follow the instructions that come with it!!
Should be just plug and play and install drivers when asked.
Have you any reason to believe this device is difficult to install?
It should be a case of taking out a blanking plate, pushing the card into place fix with retaining screw.
Restart, plug and play, browse to driver CD in rom drive, install and away U go! Martin Vote if you found this post helpful please!!
Should be just plug and play and install drivers when asked.
Have you any reason to believe this device is difficult to install?
It should be a case of taking out a blanking plate, pushing the card into place fix with retaining screw.
Restart, plug and play, browse to driver CD in rom drive, install and away U go! Martin Vote if you found this post helpful please!!
It may be necessary to install the driver before you install the card, in this case. Did the card come with software? It may include a readme file or manual to guide you. You might try here for some guidance:
The instructions are brand-specific, but it may help. Also, this link is a .PDF (Acrobat) file and will take a while to load if you are running a dialup modem.
The instructions are brand-specific, but it may help. Also, this link is a .PDF (Acrobat) file and will take a while to load if you are running a dialup modem.
Guest_imported
New member
- Jan 1, 1970
- 0
i cant find the instructions that came with the kit...so i dont know exactly how to install the board
- Status
Similar threads
- Locked
- Question
- Locked
- Question