Installing a VAL Board

[TelecomHeadache]

Looking to install a second VAL Board (TN2501. Anyone know how or is this a Vendor issue?

Thanks for the help.

TH

 

[Phoneman2]

You might want to look to see if your RTU will allow more then one VAL board. Also you will need to set up a Data mod number. If you can, mirror your first one. Also don't forget the telnet used to upload the ann.

Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[ewaaijenberg]

First off all you should have a look at the capacity of the system and look if you have licenses for more than one VAL board.

Regards,

Evert

 

[TelecomHeadache]

Thanks all.
Yes I have the lisenses and Avaya states yes I can have two VAL Boards, actually two Boards is recommended so that you can mirror the first board and then keep the second as fail over.

Thanks again, you guys are better at responding with the correct answers as appose to the "other web site".

TH