Inside and DMZ to use differant IP addresses?

[DocHolden]

I have a PIX set up and both the inside and the dmz use the same pool for NAT. I want the inside to use the interface pool and servers in the dmz to use another IP address. For example. Inside users use a nat pool with the ip address of xxx.xxx.xxx.100 and dmz servers use an outside nat pool with an ip address of xxx.xxx.xxx.101. Is this possible? and if so how?

Thanks in advance.

 

[rudeboy]

Try this. Change the 192.168.0.0 subnet to your LAN subnet and 172.16.0.0 subnet to your DMZ subnet.


global (outside) 1 xxx.xxx.xxx.100
global (outside) 2 xxx.xxx.xxx.101
nat (inside) 1 192.168.0.0 255.255.255.0
nat (dmz) 2 172.16.0.0 255.255.255.0

 

[DocHolden]

Thats what I needed. Thanks for the information.