Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Index Number Logic

Status
Not open for further replies.
Guest_imported

Guest_imported

New member
Jan 1, 1970
0
0
0
I have noticed that the index(port)numbers do not seem to follow a logical progression when comparing a 450 to a 1200. (e.g. the first board contains 2 dual fiber ports, numbered 16 and 17. There is a filler plate, then the next board is a 16 port board, numbered 48-63, then the Switch Fiber, another filler, then another 16 port, starting with 96, and the remaining 2 16 port boards seem to follow accordingly.) What am I missing?

Thank you in advance.
 
Status
Not open for further replies.

Similar threads

G450
  • Locked
  • Question
BCM 450 not dialing local 10 digit number on a PRI
Replies
0
Views
47
G450
G450
Kingsway Eye
  • Locked
  • Question
xfer node to external number, how to transfer under caller ID of the original caller
Replies
0
Views
36
Kingsway Eye
Kingsway Eye
ComputerGeek96
  • Locked
  • Question
External calls incoming then transfering to external numbers causing lines to get stuck open.
Replies
1
Views
33
jsaad
jsaad
avaya033
  • Locked
  • Question
Avaya Call BackAssist stop showing Callers number once receive on agents phone
Replies
0
Views
21
avaya033
avaya033
yamel1
  • Locked
  • Question
callpilot 100 number of rings before users vm answer
Replies
0
Views
15
yamel1
yamel1

Part and Inventory Search

Sponsor

Back
Top