Got odd isue with a system in Austria,
This specific system seems to have issue with certain incoming calls. When dialing in from the local area (Vienna), or when dialing in slow (digit by digit), the networks gives an out of service message often, while when dialing enbloc, or from a cell, call comes through. The system is S8300C in a G450 with V5.2 on.Lines are 7 BRI's, joined and sharing the same numberplan.Are there any specifics to the BRI's in this area?, as they seem to be diffrent then elsewhere in Europe, as they also seem to use an odd subadressing method.(dial the number then stick 2 digits behind as an extension). Any specific timers that can be adjusted?
Anyone that is able to share a working trunk config for BRI, and an "incoming" config for Vienna?
thanks
This specific system seems to have issue with certain incoming calls. When dialing in from the local area (Vienna), or when dialing in slow (digit by digit), the networks gives an out of service message often, while when dialing enbloc, or from a cell, call comes through. The system is S8300C in a G450 with V5.2 on.Lines are 7 BRI's, joined and sharing the same numberplan.Are there any specifics to the BRI's in this area?, as they seem to be diffrent then elsewhere in Europe, as they also seem to use an odd subadressing method.(dial the number then stick 2 digits behind as an extension). Any specific timers that can be adjusted?
Anyone that is able to share a working trunk config for BRI, and an "incoming" config for Vienna?
thanks