Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

in place upgrade from 4.5 sbs to 2000 sbs?

Status
Not open for further replies.

sacramentum666

IS-IT--Management
Feb 25, 2004
25
US
First of all wish everyone a great day

I want to know if there is an in place upgrade version for sbs 4.5 to sbs 2000 or sbs 2003. i know there is a migration upgrade for both but i want to do an in place upgrade saves a lot of time

thanks

sal gil

 
I believe that you would be fine putting the CD for 2000 sbs in and then running

WINNT32

or

WINNT32 /CHECKUPGRADEONLY to see if your hardware meets the HCL

Jeff
 
In place from 4.5 to 2003 isn't possible because of XC2003. Should be ok for 2000 but depends on your current hardware capacity.
 
ntinlin is correct. To go to 2003 you would need to do an interim upgrade to 2000.

I hope you find this post helpful. Please let me know if it was.

Regards,

Mark
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top