Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IGS to IPE Conversion procedure?

Status
Not open for further replies.
jaxuser

jaxuser

Technical User
Apr 6, 2006
320
US
Does anyone know where in the docs I might find a procedure for converting an IGS module to IPE? Also, looking for a breakdown of the NTWB15GA assembly. I seem to be missing the power harness and don't have a part number
Thank you for any direction.
 
Sort by date Sort by votes
Really no step by step procedure that I know of. Basically remove the Top Cap, remove the IGS, install the IPE and power harness. You will also need to extend the ribbon cable for the system monitor up through the new IPE.
 
Upvote 0 Downvote
Thank you - missing NT7D11 power harness.
 
Upvote 0 Downvote
DC switch, huh? Make sure you have the ribbon cable also for the System Monitor. There is 5 bolts holding the module in place, 2 in front and 3 in the rear. The power connector is kind of a pain, you will need a 2nd person if at all possible.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

trmg
  • Locked
  • Question
DNs assigned to virtual set go to reorder 1
Replies
10
Views
705
trmg
trmg
Everest67
  • Locked
  • Question
remote access to NORTEL 81c
Replies
4
Views
404
Everest67
Everest67
umts
  • Locked
  • Question
RDB to Excel Sheets Script
Replies
2
Views
354
umts
umts
linsha
  • Locked
  • Question
DNB file conversion
Replies
2
Views
311
linsha
linsha
JM2009
  • Locked
  • Question
CS1000 how to use telent to download the ip trunk error message??
Replies
3
Views
584
psychotech
psychotech

Part and Inventory Search

Sponsor

Back
Top