Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IE6, W2K, Sambar Proxy, bizarre squid things

Status
Not open for further replies.

chughes

MIS
Aug 7, 2001
27
US
Hi folks.
I am completely baffled.
I've got about thirty client computers W98, W2K running IE6
proxying through a W2K box running Sambar Server.

When the clients start up IE, it pops right up to their
home page; when they navigate off the home page
it fails to connect for two or three minutes,
then will intermittently connect to wherever they
want to surf to.

When it is failing to connect they get messages from
squid.iccn.com that "access was denied, contact your
administrator". (CNN.COM is home page for a lot of people)

I also see unusual behavior in IE6 - it "hangs" on a site -
you can surf to google.com, then type in a different address
and hit enter; it takes you right back to google.com.
then, wait a minute or two and you will be allowed to
navigate away from google.com (or whatever).

The Sambar Server box has one NIC, two different addresses on it (it is mail server as well, and internally we use
a different address to hit the mail server).

I'm flummoxed; I've changed settings in IE6 to refresh page every time; use minimum disk for temp files; done all the windows updates that were available ( I know, that's probably what got me into trouble).

anyone got a clue?
Chris
 
turn off auto-configuration in your internet setup.
 
that would be the "automatically detect settings" right?
it's turned off.
so is "Use http 1.1 through proxy".

<sigh>
 
hmm ... i don't know about the sambar server ... i know a lot about Samba servers running on unix/linux boxes ...

from this forum, previously, it would have seemed that the 'automatically detect settings' would have been the problem ...

on our unix boxes, if it takes a long time it is usually because the dns name service has screwed up, it might be worth while looking to see if that is the problem (although i don't expect that to be the problem)

if that doesn't work, if you're not averse to open-source, i could try and talk you through an alternative system ...

sorry i couldn't help, if not

Jon
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top