ICC Warning on S8700

[YIMMER]

Hello all, I have a S8700 with 2 G350 at remote locations in Trinidad and about a month ago we lost power at both remote (g-350) locatons. All came back up ok but the alarm will not clear. 002V1 ICC WARNING ON BOARD and the same for 001V1. Has any one seen this and how to clear.
Thanks
Yimmer

 

[98Converter]

This is from a previous post.

Reset the media gateway and it should bring it back. If an LSP configured server ever goes into LSP, you have to reset it so it will try and re-register to the Primary Media Server, i.e. your S8700.

Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[YIMMER]

The 350's came back ok but the ICC alarm on the S8700 will not clear

 

[Spookytooth]

I'm having this same issue also. Doesn't seem to be service affecting though. Any one have any ideas?

 

[JayNEC]

Try resetting the 8300's. Telnet to the linux shell and issue a "stop -rn