Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I2002

Status
Not open for further replies.

HelpAtWork

Technical User
Joined
Mar 20, 2008
Messages
71
Location
CA
Can anyone help me program a I2002. I would like KEY 05 to have the ADL (autodial) feature.
So something like:
KEY 05 ADL ?
KEY 05 ADL 16 ?
I get a error saying that i cant program this feature on this button.
Thank you Smet
 
I don't have my books, but something like keys 5-12 might be restricted or not used, you will have to try another key for that, perhaps a lower key.

Mato' Was'aka
 
IP Phone 2002/1120E/1220 only have four Programmeable DN/Feature keys. You can therefore only program ADL against keys 0-3.
 
Thank up guys for the feed back...

So there is no alterntive?
 
Doing some researh on I2002,
NTP

Key number assignments
You can assign a maximum of nine functions to the four soft-labeled,
predefined soft keys. Because the soft keys are predefined, the user cannot
change the key number assignment. Functions are assigned to the soft
keys in layers in LD 11.
I should be able to program 9 keys to the 4 button phone? 05 is restricted?
 
gwebster already answered your question.

There is NO key 5 at IP 2002.

If you need more keys, you may like to use IP 2004.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top