Guest_imported
New member
- Jan 1, 1970
- 0
I am facing issue while attaching btrieve table via odbc. but while accessing i am getting an error "ODBC Lick failed"
Need help
Need help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
I want to attach btrieve table in access 2000? any idea....
- Thread starter Guest_imported
- Start date
- Status
Pervasivite
Instructor
In order to attache a Btrieve table, you must have good DDFs or you will have to create DDFs yourself which can be a very difficult task. It is easiest to get the DDFs from the application vendor since they are the ones who created the data layout of the tables and know it best. You should then check the DDFs with the PCC to make sure they are accurate. Once that is done you shoudl then be able to attach to a table and view/ modify the data. You will not be able to do this if the application vendor has put security on the table, but that is pretty unlikely. I suggest that you try attaching to tables in DEMODATA to test how to do it with files that have good DDFs.
Regards,
Pervasivite
Regards,
Pervasivite
- Status
Similar threads
- Locked
- Question
- Locked
- Question