i lost the flash ios in the catalyst 1900

[smilth]

i am foolish erase the catalyst 1900 ios in the flash ,could u have it,help me pls,thx!

 

[peeky1323]

I'm not 100% sure about the 1900 CAT but on other (like 3XXX) switches you can do a xmodem copy of the IOS. It takes ages but it works. I did a similar thing once. I deleted the flasj image to make room for a new one, but the new one was corrupted. Doh!

The following link shows this can be done on a 2900 and 3500:

http://www.cisco.com/warp/public/473/corrupt_or_missing_image.html

Or firmware via xmodem is the similar on a 1900:

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a008007d0ff.html

Sorry if this is irelevant but it may help.

Matt