I can ping all but one VPN client

[TheStressFactor]

Hey all,

I have my vpn not fully functional between my cisco pix 515e and the watchguard firewall(thanks yizhar). It works fine and I can ping all remote hosts but one. And I have no idea why. It is a unix box and it the only machine that will not respond to ping. When I tracert to it, it goes right to the watchguard firewall and then fails right after. Any idea what needs to be configured on the other side? Or what I may have misconfigured?

Pat

 

[yizhar]

HI.

This is probably a routing issue at the Unix box.
Check the default gateway of that machine, or ask the Unix administrator to add static route as needed.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[yizhar]

HI.

> have my vpn not fully functional between my cisco pix 515e and the watchguard firewall ...

What was the issue and how did you solve it?

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[TheStressFactor]

He had the wrong encryption and authentication on his side

 

[TheStressFactor]

also..when i tracert to this unix box i hit the watchguard and after that it times out..if i try to hit another client behind the watchguard it hits the watchguard and then the client...

 

[TheStressFactor]

Thanks Yizhar...I had the watchguard admin(the admin for the clients behind it as well) look at the default gateway..he made the neccessary change and BAM..it worked..thank you very much.


Pat